White Preformed Thermoplastic Road Marking Roll - 100mm x 5m | FIXA

100mm x 5m white preformed thermoplastic road marking roll for professional line reinstatement, road marking repairs, car parks, yards and other suitable bituminous or prepared concrete surfaces.

This preformed thermoplastic material is designed for fast, controlled installation with minimal waste. When correctly applied it can typically be trafficked within approximately 5–10 minutes.

Key technical features

• Colour: White
• Size: 100mm wide x 5m long
• Material thickness: 2.8mm ± 0.5mm
• Skid resistance: ≥55 PTV
• Retroreflectivity: 150 mcd/m²/lux minimum (white material)
• Luminance value: 0.80 (white material)
• Softening point: 100°C minimum
• Typical cure time: less than 5 minutes
• Recommended substrate application temperature: 5–40°C
• Meets BS EN 1436 and BS EN 1871
• Formulated with non-toxic, heavy metal-free pigments

Typical applications

• Road-marking reinstatement
• Car parks and depots
• Yards and commercial sites
• Local line repairs and maintenance

Suitable surfaces

Suitable for direct application to sound bituminous substrates. Concrete and other cementitious surfaces require suitable preparation and primer before installation. The surface must be structurally sound, clean, dry and free from loose debris, oil, grease and failing coatings.

Application notes

Do not install onto damp, frosted or visibly wet surfaces. Newly laid concrete should be allowed to cure for at least 28 days before application. New asphalt should be heated carefully to avoid excess bitumen bleed-through.

Storage

Store indoors in the original protective packaging, completely flat, right-side up and out of direct sunlight. Typical shelf life is approximately 12–24 months from manufacture when stored correctly.

Pack information: 8 rolls per box. Product sold per 5m roll.

Browse the full preformed thermoplastic road-marking range, visit the FIXA road-marking materials hub, or read the road-marking reinstatement and line-repair guide.

Technical information is based on the current supplier-issued Road Pro technical data sheet. Always read the current technical data and installation instructions before use. Visit the white-line and car-park marking refresh guide.